______________________________________________
______________________________________________
Angle 4928, 4929, 4925, 5950
Used to support or brace two surfaces perpendicularly to one another
______________________________________________
______________________________________________
Flat 4930, 4931
Used to support or brace two surfaces on the same plane
______________________________________________
______________________________________________
Component/Hold Down 2811, 2810
Used to clamp one component or surface to another
______________________________________________
______________________________________________
Cord/Strain Relief 5356, 5355, 5357, 5358
Used to clamp around a cord to eliminate tension on the cord connections normally inside an electrical box
______________________________________________
______________________________________________
Retaining* 5310, 5311
Used to clamp tube, wire, hose or pipe in its proper location in an assembly
______________________________________________
______________________________________________
Cable* 5300, 5301
Used to hold clamp wire or tube in its proper location in an assembly
______________________________________________
______________________________________________
* Retaining and Cable clamps are very similar in application though styles vary
 |
 |
 |
 |
 |
 |
| The cord clamps prevent wires from being pulled off of terminals. |
 |
Holds many wires in place.
