Seastrom Manufacturing Certificate of RoHS Compliance

January 01, 2008

Certificate of Non-Compliance

European Union Directive 2002/95/EC
Restriction of Hazardous Substances

The following materials and processes used at Seastrom Manufacturing Co., Inc. have been classified as Non-Compliant in accordance with the European Union Directive 2002/95/EC (RoHS). This Directive, however, does not affect the use of parts in applications outside of the Directive’s specified countries.

Non-Compliant Process/Finish

Process/Finish:

Chemical Film Finish

Hexavalent Chromium Finish

Cadmium

Chrome

60/40 Tin Lead Finish

Zinc Plate, Type II (Yellow)

Chromatic Anodize, Type I

Denoted @ end of part # as:

CHR

C1,

CHR

TL1,

TL2

Standard Electroless Nickel Plating (can be RoHS compliant if specified by customer on order)

Non-Compliant Materials:

2011 Aluminum Rod (primarily used in shoulder washers, spacers, and washers with thin side walls.) For Aluminum parts, please contact Seastrom at info@seastrom-mfg.com to see if Aluminum 2011 is used for a specified part.

Sincerly,

Quality Engineer
Neal Bradshaw
Signature or Neal Bradshaw

Process Engineer
Brad Mohr
Signature of Brad Mohr

January 01, 2008

Certificate of Compliance

European Union Directive 2002/95/EC
Restriction of Hazardous Substances

Any Seastrom part number produced by Seastrom Manufacturing Co., Inc. that meets the following conditions is classified as compliant in accordance with European Union Directive 2002/95/EC (RoHS).

Material:

Any of the materials listed below without a process/finish.

Non-Metals:

Delrin (Acetal)

Epoxy Glass (Fiberglass)

Fluorocarbon (Viton)

Fluorosilicone

Kapton

KEL-F (PCTFE)

Mica

Mylar

Neoprene

Nitrile (Buna-N)

Nylatron

Nylon

Phenolic

Polyethylene

PVC (Polyvinyl Chloride)

Santoprene

Silicone

Teflon

Vulcanized Fibre

Metals:

Brass

Copper

Beryllium Copper

Phosphorus Bronze

Cold Rolled Steel

Spring Steel

Stainless Steel

Steel

Titanium

The following base materials contain > 0.1% lead , but are exempt under note 6 of the Directive’s Annex:

12L14 Steel (0.35% of weight max)

C - 360 Brass Rod (3.7% of weight max)

Process/Finish:

Any Seastrom part number produced with a process/finish listed below is compliant under the Directive, unless the base material is Aluminum. (Contact Seastrom for Aluminum part status)

Compliant Process/Finish:

Less Finish

Sulfuric Anodize, Type II

Hard Anodize, Type III

Black Oxide

Passivate

Phosphate

Electrolytic Nickel Plate

Silver Plate

Tin Plate

Tin Dip

Zinc Plate, Type I (Blue)

Zinc Plate, Type III (Clear)

Denoted @ end of part # as:

Designated Electroless Nickel Plating (RoHS Compliance must be requested by customer)

Sincerly,

Quality Engineer
Neal Bradshaw
Signature or Neal Bradshaw

Process Engineer
Brad Mohr
Signature of Brad Mohr